Multi Pulse Plater

We provide the following Multi Pulse products:

Multi Pulse Plater 250 A Dual module >>
Multi Pulse Plater 500 A Dual module >>
Multi Pulse Plater 500 A Single module >>
Multi Pulse Plater 750 A Single module >>
Multi Pulse Plater 1000 A Single module >>

Air cooled Multi Pulse Plater 250 A Dual output – 1000 A Single output

Kraft Multi Pulse Plater is designed for a top performance and has highest reliability for use in any plating process.

Suitable for pulse processes:
• Advanced PCB production, vertical or horizontal plating
• Precision plating of complex structures
• Laboratory use

Benefits in pulse plating:
• Increased plant capacity
• Uniform plating
• Savings in solder mask and chemicals

Process optimized:
• Complex pulse waveforms
• Pulse sequensing
• Programmable A & B outputs
• Process diagnostics

The Kraft Multi Pulse Plater is a switch mode pulse power supply designed for operation with all kind of plating lines, vertical and horizontal, soluble or insoluble anodes. The Pulse Plater is configurable as a single or dual output unit.

The Pulse Plater is normally connected to one cell with one output for each anode rail, giving independent current control to each side of the plating goods e.g. PCB. The output pulses at the dual outputs are synchronised. The output pulses can also be synchronised for up to 30 Pulse Platers.
The Pulse Plater can be operated manually by the display at the front or remote by the serial bus (RS-485).

For best production results, the Pulse Plater should be located close to the electroplating cell. The connection length between the Pulse Plater and the cell are of vital importance.

For further information regarding basic principles for pulse plating and how to get the best out of pulse rectification, download information below!

The Pulse Plater is air cooled with internal fans. All the electronics are sealed from the ambient air, ensuring a long life for the product.